Our production voltage levels: 0.23,0.25,0.28,0.3,0.4,0.415,0.44,0.46,0.45,0.48,0.5,0.525,0.6,0.69,0.75,0.95,1.2 KV Name Low self-healing shunt capacitor model BCMJ BSMJ BKMJ BZMJ For the environment: A. Temperature: minimum -25 ℃, maximum +50 ℃ (special design minimum -40 ℃, maximum +60 ℃). B. Altitude: not more than 2000 meters. (Special design not more than 3000 m) C. Relative humidity: less than 95% of the conventional parameters: A. Dielectric loss: not more than 0.001 Loss: Media uses polypropylene film: loss of less than 0.5W, KV.AB. Tolerance: Nominal capacity: 0% - +10%, phase imbalance is not more than 1.05% C. Test voltage: between pole 2.15U1 +1.5 UH 5 sec; between 3600 volt pole shell, two seconds. D. Discharge: power, within 1 minute / 3 minutes to 50 volts the discharge E. Sealing performance: 80 ± 2 ℃ 3h no leakage F. Safety performance: 100% capacitor cut protection. GB: GB12747-2004, to meet the IEC60831-2 standard destructive testing requirements. Meet the requirements of UL810 standard 10000AFC operating parameters: A. Overload: Allow over-voltage: 1.10Un; allow over-current: less than 1.3In rated current for continuous operation, (specially designed to meet the 1.6-2.5In) B. Reliability: nominal operation at rated voltage and 60000/5000 hours under category temperature, product failure is less than 6% / 0.5% (1ppm element hour). Meet U.S. Electrical Industry Association EIA-456-A standard.